To begin, the product to be filled is loaded into the hopper, and the target weight is set. The package is then placed on top of the scale, and the table is adjusted (up/down) so that the funnel is inside the bag. After the completion of the first fill cycle initiated via foot pedal, the controller will automatically switch into “learn mode” for the first cycle. During this time, the controller tests the flow characteristics of the product, and decides the best speeds and duration for the fill cycle. The bag is then removed and sealed. Each successive container is now filled according to the program, by placing it under the funnel and depressing the foot pedal. If you wish to integrate this Dry Product Filler with an Indexing Conveyor you can automatically fill rigid containers such as jars and cans.