Using unique and patented technology, the APACKS Linear Bottle Blow Molding Machine achieves high production outputs and excellent container quality. The mechanical operation, is completely electrical, allowing more time for the stretch-blow molding process. The efficiency of the oven heating and ventilation does not impose thermal conditioning limits on the preforms. The electrical stretching gives precision and flexibility to the process and guarantees full repeatability.
Simply click on the link below to open the pdf. If you would like to download it, please right click, and then choose save as.
Download Spec Sheet
Sincro Tribloc is an innovative system that incorporates the production, labeling and filling/capping of PET containers in an integrated system. Sincro TriBloc production output ranges from 12,000 to 48,000 b/h.
APACKS Start Blow Molding machine is specially created to enable companies in emerging markets to make their steps into the PET bottle production. This equipment is also designed to satisfy the needs for small and simple blow molding machines with low investment, low complexity, and with good technical support.
APACKS Rotary Blow Molding machines enable users to produce standard containers at rates of 2,250 bottle/hour/cavity, complex custom containers such as heat set containers for hot filling at rates up to 1,800 bottles/hour/cavity, or handling and blowing of very light containers with extremely high preform stretch ratios. Today, there are seven models available. The number in the acronym indicates the number of blowing cavities. The model SFR 9/27 is equipped with 9 stations able to carry either 9 standard shell molds or 9 triple-cavity molds for a total of 27 blowing cavities.
This blow molding machine can create bottles from three liters to ten liters and can produce 1600 ten liter bottles per hour. The high machine performance is provided by mold closing system analogous to rotary machines. The stretching rods were developed specially for thick-walled preforms for five-ten liter bottles. This guarantees blowing process stability and exclusion of deformation.
