,

Low Profile Chain Driven Low Volume Stretch Wrapper

The PATRIOT’s lean no nonsense feature rich design make it the perfect entry level machine. Ideal for low volume production environments, The Patriot can help reduce labor and material costs while improving production efficiency. The chain driven Turntable and Carriage steel welded construction make it one of the most durable machines on the market. This machine comes equipped with large 85″ maximum wrap diagonal and 4,000 lb. load capacity, based on a 60″ diameter Turntable for low profile machines, and 50″ x 50″ square Turntable for high profile machines. Additionally, with a wide selection of Turntable and Tower options, The PATRIOT can be configured to handle oversized and tall loads. As with all Stretch Wrappers, the PATRIOT is manufactured using quality materials and components.

SKU: DRPMFO3B1R Categories: ,

 

  • Welded heavy-duty reinforced structural steel construction for around-the-clock operation
  • Powder coat finish that provides a durable scratch resistant surface and prevents corrosion
  • Forklift portable
  • 4 point caster support for HP turntable
  • 8 point – Delrin caster support for LP turntable
  • Turntable direct drive: 1/2 HP, 90 VDC motor with ANSI 50 chain
  • Allen-Bradley® Micrologix PLC
  • UL approved components
  • External fuses
  • Top over-wrap control feature (TOC)
  • Cycle pause control
  • Turntable jog control
  • Dual LED wrap counters
  • Adjustable top and bottom wrap counters (0-7)
  • Home position alignment
  • Photo electric load height sensor that detects most dark colored loads
  • Variable carriage speed (0-21 FPM)
  • Carriage drive: 1/3 HP, 90 VDC motor with ANSI chain drive
  • Variable stretch control (manual 0-100%)
  • Electrical Power Requirements: 120VAC, 1PH, 60hz, 10A
Turntable System Option: Oversized Turntable: 72″ diameter, Standard Turntable: 60″ diameter

  • Access Ramp (standard): Used for hand pallet jack loading to low profile machines.
  • 48″ Ramp Extension: Used for Electric Pallet Jack loading to low profile machines.
Split Frame Construction: Used for increasing load clearance to the tower for oversized pallets.

  • Can be utilized with existing scales. (Note: machine wrap height will decrease proportional to how far the base is placed from the tower)
  • 12″ Extended base frame used for oversized pallets (low profile split models only)
Extended Film Tower: Used for wrapping taller loads exceeding standard machine capability. Standard machine wraps up to 84″ high (LP).

  • 12″ Extended Tower
  • 24″ Extended Tower (knocked down tower, some assembly required)
  • 36″ Extended Tower (knocked down tower, some assembly required)
Turntable Upgrades: Used for such applications as where the full skid or slip sheet has to be totally supported or larger load diagonal is required.

  • 72″ Round turntable & 6000 lbs load capacity upgrade (low profile)
Top Platen (Free Standing): Used for tall, light, or unstable loads. This device applies pressure to the top of the skid stabilizing the load for rotation. It comes with a 24″ diameter padded disc. No compressed air is required.

  • 12″ Extension on top platen mast
  • 24″ Extension on top platen mast
  • 36″ Extension on top platen mast
Cycle Counter: A device that counts the actual cycles of the machine (resettable)

  • Optional Input Voltages: 200V – 480V / 60HZ 200V – 480V / 50HZ
Shopping Cart