Sincro Tribloc Bottle Blow Molder

Sincro Tribloc is an innovative system that incorporates the production, labeling and filling/capping of PET containers in an integrated system. Sincro TriBloc production output ranges from 12,000 to 48,000 b/h.

SKU: 3EEZF45KRW Category:

 

Standard Features

 

  • Preform transport system: Preforms are loaded onto the spindle (and not vice versa) by means of cam track-driven grippers. No chain axial movement.
  • Heating oven: Innovative ventilation through the lamps to maximize heat transfer by radiation (convection minimization)
  • Preforms transfer: Simplified transfer wheels with small diameters and lower peripheral speeds.
  • Bottle Blowing: – Relevant space saving (20% to 30%) for the blowing wheel compared to equivalent machines: preforms & bottles centrifugal forces are very low.
  • Flexibility: Quick changeover without need of tools. Simultaneous access to more than one station.
  • Energy and compressed air savings: Possibility of reducing the size of the compressor up to 45%.
Benefits

  • Space saving: Sincro TriBloc -55% space vs. standard line
  • Costs reduction: Operative costs = -15%.
  • Sustainability: Label 100% recyclable, together with the bottle and the cap, absence of hot melt fumes, no solvents for cleaning.
  • Efficiency: The blow moulding machine and the filler are electronically coupled and special transferring systems are foreseen to reduce the stumblings. The integrated design of the system ensures a high efficiency of the overall platform.
  • Lightweight: Sincro TriBloc is the most suitable solution for the treatment of extreme lightweight bottles.
  • Hygiene: A preform treatment system, the direct connection between blowing, labelling and filling, the over-pressured environment are guaranty of high hygiene level.
  • Extreme operating flexibility: It can handle a wide range of bottles, necks and caps sizes (both flat and sport).

Optional elements

For particular production needs, the module can be completed with a number of additional solutions, including:

  • The starwheels can be equipped with a precise and rapid size change which works with different diameter necks without the need for any tools: e.g. 28 – 38 mm. The same philosophy is applied in the event of body guides replacement.
  • In case of petaloid bottle base or special filling requirements of the product, a spray nozzle system can be installed to cool the bottom of the bottle. In order to reduce the costs of this application, the solution is fitted with a collection channel and water re circulation system.
  • Carbonated water
  • Non carbonated water
  • CSD
  • Clear juice
  • Isotonic and sport drinks
  • Tea
  • Hot-filled products

Related products

  • Out of stock
    Bottle Blow Molding

    Start Blow Molding Machine

    APACKS Start Blow Molding machine is specially created to enable companies in emerging markets to make their steps into the PET bottle production. This equipment is also designed to satisfy the needs for small and simple blow molding machines with low investment, low complexity, and with good technical support.

  • Out of stock
    Bottle Blow Molding

    Rotary Blow Molding Machine

    APACKS Rotary Blow Molding machines enable users to produce standard containers at rates of 2,250 bottle/hour/cavity, complex custom containers such as heat set containers for hot filling at rates up to 1,800 bottles/hour/cavity, or handling and blowing of very light containers with extremely high preform stretch ratios. Today, there are seven models available. The number in the acronym indicates the number of blowing cavities. The model SFR 9/27 is equipped with 9 stations able to carry either 9 standard shell molds or 9 triple-cavity molds for a total of 27 blowing cavities.

  • Out of stock
    Bottle Blow Molding

    Bottle Blow Molding Machine

    Using unique and patented technology, the APACKS Linear Bottle Blow Molding Machine achieves high production outputs and excellent container quality. The mechanical operation, is completely electrical, allowing more time for the stretch-blow molding process. The efficiency of the oven heating and ventilation does not impose thermal conditioning limits on the preforms. The electrical stretching gives precision and flexibility to the process and guarantees full repeatability.

  • Out of stock
    Bottle Blow Molding

    Automatic Ten Liter Bottle Blow Molder

    This blow molding machine can create bottles from three liters to ten liters and can produce 1600 ten liter bottles per hour. The high machine performance is provided by mold closing system analogous to rotary machines. The stretching rods were developed specially for thick-walled preforms for five-ten liter bottles. This guarantees blowing process stability and exclusion of deformation.

Shopping Cart